EXTRA 19" R- PERFORATION EXPORT SERVER RACK 27U, 60x60 cm.
19" Extra Perforated Rack Design and product Modular knock down system.
Which is very easy to assemble remove the rack.
- Material made of electro galvanized sheet steel 1.5mm.thickness.Mounting Pole,
Frame Structure and Base made of 2.0mm. Caster stand made of 3.0mm.
steel 100% rust-proof and durable.
- The roof of rack can be install ventilating fan 1 ea. to 6 ea. Maximum (1x4", 2x4", 3x4").
It is vented raised roof cover. Slide shutter for cable can additional (Option).
- The inside of rack can be built the PL.7w. light and limit switch for
automation lighting on-off when open and close rear door(Option).
- The front door is laminated clear glass or acrylic with Perforated Vented along
the door's edges and Luxury black Swivel Handle lock or turn lock.
- The rear door has two key locked (27U up) and square or slot holes perforated ventilation if door's
area to prevent increase heat inside to extend the life of all network equipment and servers.
- The bottom rack have slide shutter for cable and protection intrusion of animal.
Ventilation fan can additional (Option).
- The side panel security with security lock is turn lock and Slide latch can be quick
release for install or maintenance.
- Mounting vertical frames support is electro galvanized sheet steel 2mm. thickness,
can be adjustment as requirement Square mounting holes in compliance with extraordinary strength.
- The hinged of front-rear door made from aluminum for heavy duty
(Hardness and 100% rust-proof finish). Without any interfering noise.
- Caster made of black or white Nylon Six with the diameter of 75 mm.
equipped on the 360 degree swivel that allow to be moving conveniently
with capacity the static load 150 Kg./caster.
- Pedestal's base made of black ABS and can be freely adjustable to suit the slope
and protect all effect from static and earth leakage.
- Ground system all part of rack completed by cable 2.5 square mm. earth kit.
- Provide with M6 bolt cage nuts and plastic washers.
- Finish coat is Two-Tone with gray and black gray made of powder epoxy coating by
electro-static system for drying to enhance strength.
- Meet to with standard ANIS/EIA-310D-1992 (Rev.EIA-310-C),
IEC 60297-1, IEC 60297-2, BS 5954:Part 2, DIN 41494
- Manufacturing standard ISO 9001: 2000 Company.